ARALDITE Karpenter is a synthetic Resin adhesive in the form of a milky white viscous paste used for bonding wood, plywood, laminates, veeneers, particle boards etc. to each other.

  • Ready to use
  • Heat / water resistance
  • Unsurpassed bonding strength
  • Economical in long run
  • Higher coverage
  • Specially formulated for vertical / flat lamination
  • Excellent spreadability
  • Mild odour & eco friendly
  • New international packing
  • Saves time & labour
  • Higher shelf life

All types of Wood Working (For bonding Plywood, Laminate, Wood, Veeneers, Block Board, Particle Board, MDF to each other.) Furniture Industry. Handicrafts. Sport Goods Manufacturing. Book Binding / Packaging / Paper tubes. Fabirc Starching. Wall paper fixing. Transformer Industry. Carpet Manufacturing.
How to Apply:
  • Clean both the surfaces to be bonded.
  • Stir the container well before the application with a wooden stick / glass rod.
  • Dilution is not recommended, as it is a ready to use material.
  • Apply a thin coat of Araldite KARPENTER PVA on both or one side(as per requirement)
  • Spread the adhesive evenly in about 5 - 10 minutes. Press the two surfaces together and keep it under pressure till the adhesive is completely dried.
  • Pressure can be in form of clamps, nails, wooden support, etc.
  • The excess adhesives on joint / sides should be wiped out with a wet cloth.
  • The pressured can be removed in after 5 - 6 hours in case of hot climate and whereas the pressure can be removed after 20 to 24 hours in case of Monsoon or Cold climates.
Precautions & Limitations:
  • Keep the container tightly closed when not in use.
  • Wash hands thoroughly after handling
  • Store under ideal conditions in cool & dry place.

Jar: 125g, 250g, 500g, 1Kg, 2Kg, 5Kg, 10 Kg, 20Kg, 30Kg, 50Kg.
Pouch Pack: 1Kg
Designed & Maintained by: Krunal K. Doshi (099256 04075)